Table of Contents
Advertisement
TIMER RECORDING USING
THE VIDEO Plus+
You can programme the timer using the PlusCode
programming numbers that are printed in TV guide
magazine. You can set eight programmes to record.
• Use the remote control for the this procedure.
• Insert a cassette tape with its erase prevention tab in
place. (If necessary, rewind or fast forward the tape
to the point at which you want to begin recording.)
1
Press the VIDEO Plus+
Button.
If you have not set the clock yet, "CLOCK" setting
menu appears. If so, follow the steps outlined in the
"Setting the Clock" section. Then, set the timer.
2
Press the Number Buttons to set the
PlusCode number of the programme you
want to record.
• Press the
Button to go back one digit from cur-
h
rent digit while you set the PlusCode number.
3
Select once, daily, everyday, or weekly
recording.
For once-only recording:
Press the VIDEO Plus+ Button.
For daily recording: To record a TV programme at
the same time on the same channel from Monday
through Friday. Press the DAILY/WEEKLY Button
repeatedly to select "DAILY (MO-FR)", then, press
the VIDEO Plus+ Button.
For everyday recording:To record a TV programme
at the same time on the same channel every day.
Press the DAILY/WEEKLY Button repeatedly to
select "DAILY (MO-SU)", then, press the VIDEO
Plus+ Button.
For weekly recording: To record a TV programme
at the same time on the same channel every week.
Press the DAILY/WEEKLY Button repeatedly to
select "WEEKLY", then, press the VIDEO Plus+
Button.
Note
• If the PlusCode number is not available, it will be
cleared automatically when you press the VIDEO
Plus+ Button. Enter the correct PlusCode number
and press the VIDEO Plus+ Button again.
• If the PlusCode number flashes when you press the
VIDEO Plus+ Button, this means that the PlusCode
number you entered was incorrect or the timer
recording you just programmed and another timer
recording overlap.
4
Confirm the channel number, then, press
the
Button.
g
• If your local channel information is programmed in
®
SYSTEM
• If your local channel information is not programmed
VCR
• When you select the channel number using the
PlusCode
N o . : - - - - - - - - -
• The Programme Delivery Control (PDC) is a very
PlusCode
N o . : 1 2 3 4 5 6 7 8 9
The TIMER SET light on the display comes on.
PDC(Programme Delivery Control)
The Programme Delivery Control (PDC) is a very
convenient system which assures that the TV pro-
grammes you have programmed for timer recording,
will be recorded exactly from beginning to end, even
if the actual broadcasting time differs from the sched-
uled time due to delayed start or extension of the pro-
gramme duration. Also, if a programme is interrupted
and, for example, some special news is broadcast, the
recording will also be interrupted automatically and
resumed when the programme continues.
When the PDC signal drop out because the broadcast
signal is weak, or when a broadcasting station does
not transmit a regular PDC signal, the timer recording
will be performed in the normal mode (without PDC)
even if it was programmed for PDC. When the start-
ing time of the PDC timer recording is from 0:00 to
3:59 on a given day, the PDC function operates from
20:00 on the previous day to 4:00 on the following
day. When the starting time of the PDC timer record-
ing is from 4:00 to 23:59 on the given day, the PDC
function operates from 0:00 on the day to 4:00 on the
following day. This means that if the relevant pro-
TIMER NUMBER
1
gramme is broadcasted within this period, it will be
06/05 SA
DATE
recorded correctly. if the timer is not programmed cor-
19:30
START
20:30
END
rectly, the incorrect timer setting stays in effect unless
16
CHANNEL
SP
SPEED
you cancel it. To cancel the incorrect timer setting,
PDC
OFF
refer to "TO CANCEL OR CHECK THE
START/END TIME'' on page 28.
– 29 –
DVD/VCR's memory, your local channel number
appears automatically.
in DVD/VCR's memory, "– –" or an incorrect chan-
nel number may appear. In this case, press the
Button repeatedly until your desired channel num-
C
ber appears. Then, press the
Button, it memorises in DVD/VCR's memory.
C
5
Press the
or C Button repeatedly until the
B
desired
tape speed appears.
6
Press the
or C Button to choose "ON" or
B
"OFF".
convenient system which assures that the TV pro-
grammes you have programmed for timer recording
will be recorded exactly from beginning to end (see
page 29).
7
Press the MENU Button to exit.
8
Press the TIMER SET Button to activate the
timer.
or
B
Button.
g
or
B
TIMER NUMBER
1
06/05 SA
DATE
START
19:30
20:30
END
16
CHANNEL
SP
SPEED
OFF
PDC
VCR
EN
2C15
Advertisement
Table of Contents
