Table of Contents
Advertisement
PLAYBACK
1
Turn on the TV and select the video channel
on the TV.
2
Insert a prerecorded tape.
• The DVD/VCR will turn on automatically. If the
erase-protection tab has been removed, the
DVD/VCR will start playback automatically.
3
Press the
Button to begin playback.
B
TRACKING ADJUSTMENT
• Tracking adjustment will be activated automatically
(Digital Tracking function) when you start playback.
To adjust the tracking manually, press the CH
Buttons (o/p).
• you can reduce the noise lines by pressing the CH
Buttons (o/p) in Slow mode, too. Slow tracking
adjustment is not set automatically.
• In the Still mode, press the SLOW Button, and press
the CH Buttons (o/p) until the streaks disappear.
To return to the Still mode, press the
IF A TAPE IS ALREADY IN THE DVD/VCR
Using the buttons on the DVD/VCR
Just press the
Button on the DVD/VCR. Power
B
will automatically turn on and playback will start.
(Direct Button Operation)
Using the buttons on the remote control
Press the
(Standby/Power ON) Button
to turn on, and then press the
4
Press the C Button to stop playback.
BASIC OPERATIONS
VCR
Button again.
F
Button.
B
– 24 –
SPEED SEARCH
1
During playback, press the
Button in the SP or LP modes to view a
videotape at a high speed in either a forward
or reverse direction. In this mode, the sound
will be muted.
2
Press the button again, the DVD/VCR will
now search in super high speed. (in the LP
mode only).
3
Press the
Button to return to normal play-
B
back.
STILL PICTURE
Press the
Button during playback to view a still pic-
F
ture on the TV screen.
• You can advance the picture by one frame by press-
ing the the
Button repeatedly during the STILL
F
mode.
• When the picture begins to vibrate vertically, stabi-
lize the picture by pressing the CH Buttons (o/p)
in the STILL mode.
• After the DVD/VCR has been in Still mode for 5
minutes, it will stop automatically to protect the tape
and the video head.
<Note for "Speed search" and "Still Picture">
• Usually there will be video "noise" lines (black and
white streaks or dots) on the screen. This is normal.
The still picture will, in addition to containing the
"noise"
lines,
be
This is not a fault of the machine but merely a by-
product of the technology involved in producing a
DVD/VCR with LP mode.
SLOW MOTION
• Press the SLOW Button to reduce the playback
speed. The DVD/VCR mutes the sound during slow
motion. You can control the speed by pressing the
(faster) or
(slower) Button. Press the
g
h
Button to return to normal playback.
• If it is left in the Slow mode for more than five min-
utes, the DVD/VCR will automatically switch to the
Stop mode.
VCR
or
g
h
VCR
black
and
white.
VCR
B
EN
2C15
Advertisement
Table of Contents
