Connection To An Audio System - Hitachi DVPF2EUK Instruction Manual

Dvd player with video cassette recorder

Hide thumbs Also See for DVPF2EUK:

Service manual (112 pages)

Table Of Contents

Table of Contents

Method 1

AUDIO

Audio Input Jacks

Analog Audio Out

DVD/VCR

(DVD only)

• Method 1 DVD/VCR + Stereo system

• Method 2 DVD/VCR + Dolby Digital decoder or DTS decoder

Notes

If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio out-

put in the setup mode. (See page 45)

If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode. (See

page 45)

Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio out-

put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also

damage the speakers. (See page 45)

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound

by an MD or DAT deck.

Set Dolby Digital and DTS to off for audio output in the setup mode for method 1 only. Playing a DVD using

incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to page 45 to set ON

for Dolby Digital and DTS)

If you use the OPTICAL jack, remove the protective cap.