Hitachi DVPF2EUK Instruction Manual page 11

gramme (For example: setting clock or timer pro-
gramme). Press to add or delete channel numbers dur-
ing channel preset.
44. F(PAUSE/STILL) Button
G
DVD mode [page 34]
Press to pause Disc playback. Press repeatedly to
advance the DVD picture step by step (or one
frame at a time).
G
VCR mode [page 24]
While recording, press to temporarily stop the
recording (pause). Press a second time to resume
normal recording. You can not pause a One Touch
Recording. Or, press during tape playback to
freeze the picture. Press to advance the picture one
frame at a time during still mode.
45. g(ENTER/FWD/F.FWD) Button
G
DVD mode [page 36]
Press to fast forward the Disc. Press the F Button,
then press this Button to begin slow motion play-
back. Press this Button repeatedly to change the
forward speed of slow motion.
G
VCR mode [page 21]
Press to rapidly advance the tape, or view the pic-
ture rapidly in forward during playback (Forward
Search). When setting programme (For example:
setting clock or timer programme), press to deter-
mine your selection and proceed to the next step
you want to input. Press to determine the setting
modes from the on screen menu. Press to add or
delete channel numbers during channel preset.
46. B(MENU SELECT/PLAY) Button
G
DVD mode [page 33]
Press to begin playback.
G
VCR mode [page 24]
Press to begin playback. Press to enter digits when
setting programme (For example: setting clock or
timer programme).
modes from the on screen menu.
47. CH Buttons (L/K) (VCR) [page 17,25]
In VCR mode, press to change TV channels on the
DVD/VCR; press to adjust the tracking during nor-
mal or slow motion playback; press to remove verti-
cal jitter in a Still picture.
48. REC Button (VCR) [page 25]
Press once to start a recording.
49. SPEED Button (VCR) [page 25]
Press to select the VCR's recording speed (SP or LP).
50. VCR Button [page 15]
Press to select VCR mode for the remote control.
G
You can switch the output mode of the DVD/VCR
either by pressing the OUTPUT Button on the
front panel, or by pressing the DVD or the VCR
Button on the remote control. However, pressing
only the OUTPUT Button on the front panel
does not switch the output mode of the remote
control. If you want to use the remote control,
you always need to select the correct output
mode on the remote control, too.
51. SETUP Button [page 43]
Press to enter the setup mode.
52. SUBTITLE Button [page 41]
Press to select the desired subtitle language.
53. TOP MENU/VIDEO Plus+ Button
G
DVD mode [page 34]
Press to select the setting
Press to bring up the Top Menu on a disc.
G
VCR mode [page 29]
Press to programme timer recording with the
VIDEO Plus+ system.
54. DISPLAY Button
G
DVD mode [page 39]
Press to access or remove the display screen during
DVD or Audio CD playback.
G
VCR mode [page 26]
Press to access or remove the VCR's on-screen sta-
tus display.
55. AUDIO Button
G
DVD mode [page 40]
Press to select a desired audio language or sound
mode.
G
VCR mode [page 20]
Press to select a desired sound mode.
56. Number Buttons
G
DVD mode [page 35]
Press to directly select a Track (Audio CD) for
playback.
Press to programme Tracks (Audio CD) for play-
back.
+10 Button:
When searching a TITLE, a CHAPTER, or a
TRACK, use this button to enter numbers 10 and
above. For example when entering '15', press this
button first, then press '5'.
G
VCR mode [page 22]
Press to select TV channels on the DVD/VCR.
To select channels, enter channel numbers as a
two-digit number for the quickest results. For
example, to select channel 6, press 0 then 6.
DAILY/WEEKLY Button:
Press to select once, daily, everyday, or weekly
when you programme the automatic timer record-
ing using the VIDEO Plus+ system.
57. OPEN/CLOSE Button (A) [page 33]
Press to insert discs into or remove them from the tray.
58. SEARCH MODE/QUICK-FIND Button
G
DVD mode [page 35]
Press to access or remove the Search display,
which allows you to go directly to a specific
Title/Chapter/Track/Time.
G
VCR mode [page 30]
Press to use Quick-Find mode.
– 11 –
EN
2C15