Hitachi CPX2 User's Manual And Operating Manual page 94

2. Equipment connection and network setting
2.5 Configuring and controlling the projector via a web browser (Continued)
When configuring or controlling the projector via a web browser, an ID and
password are required. There are two types of IDs, Administrator IDs and User
IDs. The following chart describes the differences between user and administrator
IDs.
Item
Network Information
Network Settings
Port Settings
Mail Settings
Alert Settings
Schedule Settings
Date/Time Settings
Security Settings
Projector Control
Remote Control
Projector Status
Network Restart
Below are the factory default settings for administrator IDs, user IDs and
passwords.
Item
Administrator ID
User ID
20
Description
Displays the projector's current
network configuration settings.
Displays and configures network
settings.
Displays and configures
communication port settings.
Displays and configures e-mail
addressing settings.
Displays and configures failure &
warning alerts.
Displays and configures schedule
settings.
Displays and configures the date and
time settings.
Displays and configures passwords
and other security settings.
Controls the projector.
Controls the projector like IR remote.
Displays and configures the current
projector status.
Restarts the projector's network
connection.
ID
Administrator
User
Password
<blank>
<blank>
Administrator ID User ID
√
√
√
√
√
√
√
√
√
√
√
√
√
N/A
N/A
N/A
N/A
N/A
N/A
N/A
√
√
√
N/A