Hitachi CPX2 User's Manual And Operating Manual page 102

2. Equipment connection and network setting
2.5 Configuring and controlling the projector via a web browser (Continued)
2.5.5 Alert Settings (Continued)
The Alert Items are shown below.
Setting Item
Alarm Time
SNMP Trap
Send Mail
Mail Subject
Mail Text
Click the [Apply] button to save the settings.
NOTE
• The trigger of Filter Error e-mail is depending on the Filter Message
settings in the SERVICE menu which defines the period of Filter Message on
the projector screen. The e-mail will be sent when the filter timer exceeds 50,
100, 200 or 300 hours based on the configuration. No notification e-mail will
be sent if the configuration is TURN OFF. (OPTION Menu of the User's Manual -
Operating Guide)
• Lamp Time Alarm is defined as a threshold for e-mail notification (reminder) of
the lamp timer. When the lamp hour exceeds this threshold that is configured
through the Web page, the e-mail will be sent out.
• Filter Time Alarm is defined as a threshold for e-mail notification (reminder)
of the filter timer. When the filter hour exceeds this threshold, the e-mail will be
sent out.
28
Configures the time to alert.
(Only Lamp Time Alarm and Filter Time Alarm.)
Click the [Enable] check box to enable SNMP Trap alerts.
Click the [Enable] check box to enable e-mail alerts.
(Except Cold Start and Authentication Failure.)
Configures the subject line of the e-mail to be sent.
The length of the subject line can be up to 255 alphanumeric
characters.
(Except Cold Start and Authentication Failure.)
Configures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
(Except Cold Start and Authentication Failure.)
Description