Hitachi CPX2 User's Manual And Operating Manual page 54

MIU Menu
MIU Menu (continued)
Item
SERVICE
54
Selecting this item displays the SERVICE menu.
Use the ▲/▼ buttons to select an item, and the ► or
ENTER button on the remote control to perform the
item.
REMOVE ALL, REMOVE SD CARD, REMOVE USB
Choose one of the following items either "REMOVE ALL", "REMOVE SD
CARD" or "REMOVE USB" that matches a media to be taken out, from
projector, when you remove the SD Memory Card or USB memory.
Use the ▲ button to perform the procedure to remove the media.
EXECUTE  CANCEL
The "SUCCEED" message will be displayed when the media is ready to
remove.
If "FAILED" message is displayed, please retry remove process again a few
minutes later.
• When removing wireless network card, turn the projector off and unplug
the power cord.
• AS long as the media is ready to remove or no media is inserted, the
"SUCCEED" message will be displayed whenever the removal procedure is
performed.
MIU RESTART
Use the ▲ button to restart the network communication. The network
communication will be cut off once and restarted.
MIU RESTART
EXECUTE
CANCEL
EXECUTE  CANCEL
• After selecting the EXECUTE, the MIU menu may not be controlled
approximately 20 seconds.
• If DHCP is ON, IP address may be changed.
Description
SERVICE
REMOVE ALL
REMOVE SD CARD
REMOVE USB
MIU RESTART