Hitachi CPX2 User's Manual And Operating Manual page 52

MIU Menu
MIU Menu (continued)
Item
SETUP
(continued)
e-SHOT
(continued on next page)
5
SPEED
NETWORK
MODE
Selecting this item displays the e-SHOT menu.
Insert the SD Memory Card or USB memory into
the projector before you use the e-SHOT function.
(10) The application software "PJTransfer" is
required to store image(s) into the projector.
Use the ▲/▼ buttons to select an item which is a still image by the e-SHOT
( 4.7 e-SHOT (Still Image Transfer) Display of the User's Manual -
Network Functions) and the ► or ENTER button to display the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
To switch the image displayed
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ or ESC button on the remote control.
To erase the image displayed and its source file in the SD
Memory Card or USB memory
(1) Press the RESET button on the remote
control while displaying an image to
display the e-SHOT - RESET menu.
(2) Press the ENTER button on the remote control or the INPUT button on
the projector to perform to erase.
To stop erasing, press the ESC button on the remote control or the ◄
button on the projector.
Description
Use the ▲/▼ buttons to select
the transfer rate.
(M : Mbps : Megabits per second)
AUTOó54Mó48Mó36Mó4Mó8M
ô
MóMó5.5Mó6Mó9MóMóM
• The AUTO mode automatically
selects the optimum rate.
• Transfer rates may change due
to the network situation.
Use the ▲/▼ buttons to select
the network mode.
WIRELESS ó WIRED
• The network mode will be initialized whenever
the power is turned on with the power switch.
• The WIRELESS will be enabled when the
wireless network card is inserted.
• The WIRED will be enabled when the wireless
network card is not inserted.
ô