Projector Control - Hitachi CPX2 User's Manual And Operating Manual

2.5 Configuring and controlling the projector via a web browser (Continued)

2.5.9 Projector Control

NOTE
• The setting value may not match with the actual value if the user changes the
value manually. In that case, please refresh the page by clicking [Refresh] button.
Controls the projector.
Item
Main
Power
Input Source
Picture Mode
Blank On/Off
Mute
Freeze
Magnify
Picture
Brightness
Contrast
Gamma
Color Temp
Color
Tint
Sharpness
MyMemory Save
MyMemory Recall
2. Equipment connection and network setting
The items shown in the table below can be
performed using the [Projector Control] menu.
Select an item using the up and down arrow keys
on the PC.
Most of the items have a submenu.
Refer to the table below for details.
Turns the power On/Off.
Selects the input source.
Selects the Picture Mode setting.
Turns Blank On/Off.
Turns Mute On/Off.
Turns Freeze On/Off.
Controls the Magnify setting.
In some input signal sources, it might stop "Magnify" even
though it does not reach to maximum setting value.
The variable range:
• For a computer, component or MIU signal 0-48
• For a video or s-video signal 0-16
Adjusts the Brightness setting.
Adjusts the Contrast setting.
Selects the Gamma setting.
Selects the Color Temp setting.
Adjusts the Color setting.
Adjusts the Tint setting.
Adjusts the Sharpness setting.
Saves the MyMemory data.
Recalls the MyMemory data.
Description
35