Searching An Input Signal; Selecting An Aspect Ratio - Hitachi CPX2 User's Manual And Operating Manual

Operating
Selecting an input signal (continued)
1.
Press the VIDEO button on the remote control.
Each time you press the button, the projector switches its
input port as below.
S-VIDEO
● If the VIDEO button is pushed to switch from a signal from
the COMPUTER IN port or an MIU signal, when TURN ON is
selected for the AUTO SEARCH item in the OPTION menu
, the projector will check the S-VIDEO port first. If no input
(38)
is detected at the port, the projector will check the VIDEO port.

Searching an input signal

1.
Press the SEARCH button on the remote control.
The projector will start to check its input ports in order to
find any input signals.
When an input is found, the projector will stop searching and
display the image. If no signal is found, the projector will return to
the state selected before the operation.
COMPUTER IN  MIU
VIDEO

Selecting an aspect ratio

1.
Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the
mode for aspect ratio in turn.
 For a PC or MIU signal
NORMAL  4:3  16:9  SMALL
 For a video signal, s-video signal or component video signal
4:3  16:9  14:9  SMALL
 For no signal
4:3 (fixed)
● The ASPECT button does not work when no proper signal is inputted.
● The NORMAL mode keeps the original aspect ratio setting.
● Performing the automatic adjustment initializes the aspect ratio setting.
6
VIDEO
S-VIDEO

VIDEO
COMPUTER/
STORAGE SEARCH
VIDEO
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
PAGE DOWN MUTE
END
OFF
FREEZE MY BUTTON KEYSTONE
1 2
MENU
POSITION
ENTER
ESC RESET
SEARCH
COMPUTER/
STORAGE SEARCH
VIDEO
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
PAGE DOWN MUTE
END
OFF
FREEZE MY BUTTON KEYSTONE
1 2
MENU
POSITION
ENTER
ESC RESET
ASPECT
COMPUTER/
STORAGE SEARCH
VIDEO
ASPECT AUTO BLANK
MAGNIFY
PAGE UP
HOME VOLUME
ON
END PAGE DOWN MUTE
OFF
FREEZE
MY BUTTON KEYSTONE
1 2
POSITION MENU
ENTER
ESC RESET