Hitachi CP-X608 User's Manual And Operating Manual page 67

MIU Menu
MIU Menu (continued)
Item
INFORMATION
SERVICE
58
the network setting.
• Only the first 16 characters of the projector name are displayed.
• Only the first 32 characters of the SSID are displayed.
• When the voltage level of the battery for the built in clock decreases, the
set time may become incorrect even though accurate date and time are
input. Replace the battery suitably. (
• MAC wireless will not be displayed when the NETWORK MODE is set to
the WIRED even if the wireless LAN SD card is mounted.
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate "0.0.0.0"
in the following condition.
(1) The NETWORK MODE is set to the WIRELESSE and the wireless LAN
SD card is not mounted.
(2) DHCP is ON and the projector does not get address from DHCP server.
Selecting this item displays the SERVICE menu.
ENTER button on the remote control to perform the
item.
REMOVE ALL, REMOVE SD CARD, REMOVE USB
the media.
EXECUTE CANCEL
• Before removing the SD card or USB memory, be sure
to perform the REMOVE procedure.
MIU RESTART
The network communication will be cut off once and
restarted.
EXECUTE CANCEL
• After selecting the EXECUTE, the MIU menu may not be controlled
approximately 20 seconds.
• If DHCP is ON, IP address may be changed.
Description
63)
SERVICE
REMOVE ALL
REMOVE SD CARD
REMOVE USB
MIU RESTART
MIU RESTART
EXECUTE
CANCEL