Miu Menu - Hitachi CP-X608 User's Manual And Operating Manual

MIU Menu

MIU Menu
Consult with your network administrator before connecting
to an existing access point on your network. Incorrect
network settings on this projector may cause trouble on the
network.
Select "MIU" from the main menu to access the following
functions.
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
See the User's Manual - Network Functions for details of
MIU operation.
NOTE • The factory default setting for DHCP is TURN OFF. If your network
has DHCP enabled, and needs to set IP ADDRESS, SUBNET MASK and
DEFAULT GATEWAY automatically, please set DHCP to TURN ON. (
Network Settings of the User's Manual - Network Functions)
• If you are not utilizing SNTP (
Manual - Network Functions), then you must set the DATE AND TIME (
during the initial installation.
Item
LIVE MODE
PC-LESS
PRESENTATION
(continued on next page)
54
2.5.7 Date/Time Settings of the User's
Selecting this item sets the projector onto the "Live Mode".
On the "Live Mode", the projector displays the images from the PC
via Network, supported by "MIU Live Viewer". (
the User's Manual - Network Functions)
Selecting this item displays the PC-LESS PRESENTATION menu.
Using the menu is able to make the projector
display the images stored in SD card or USB
memory, and realizes a presentation without PC.
( 1.2 PC-LESS Presentation of the User's
Manual - Network Functions)
Description
2.5.2
56)
1.1 Live Mode of