Using The Menu Function - Hitachi CP-X608 User's Manual And Operating Manual

Operating

Using the menu function

This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO,
SCREEN, OPTION, MIU, and EASY MENU. EASY MENU consists of functions often used,
using the same methods. The basic operations of these menus are as follows.
1.
Press the MENU button on the remote control or one of
the cursor buttons on the projector.
The Advanced MENU, or EASY MENU that has priority just
after powered on, will appear.
In the EASY MENU
2.
If you want to change it to the Advanced MENU, select the
"Go to Advanced Menu..."
3.
4.
In the Advanced MENU
2.
If you want to change it to the EASY MENU, select the
EASY MENU.
control, or the ENTER button on the remote control to select
an item. The display of the selected menu will be active.
3.
Then press the cursor button
on the remote control to progress. The operation menu of the selected item will appear.
4.
When you want to reset the operation, press the RESET button on the remote control
during the operation. Note that items whose functions are performed simultaneously
with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.
In the Advanced MENU, when you want to return to the previous display, press the
cursor button
control.
5.
Press the MENU button on the remote control again to close the menu
and complete this operation. Even if you do not do anything, the dialog will
automatically disappear after about 10 seconds.
when a certain input signal is displayed.
24
on the projector or remote control, or the ENTER button
on the projector or remote control, or the ESC button on the remote
ENTER button
Cursor buttons
MENU button
RESET button
ASPECT
ENTER
PUSH
PAGE UP PAGE DOWN
ESC MENU RESET
POSITION AUTO