Hitachi CP-X608 User's Manual And Operating Manual page 44

INPUT Menu (continued)
Item
RESOLUTION
The resolution for the RGB1 and RGB2 input signals can be set on
this projector.
The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu select the
buttons.
Selecting AUTO will set a resolution
appropriate to the input signal.
selecting a STANDARD resolution will
automatically adjust the horizontal and
vertical positions, clock phase and horizontal
size and automatically select an aspect ratio.
The INFORMATION dialog (
displayed.
(4) To set a custom resolution use the
the CUSTOM RESOLUTION BOX will be
displayed. Set the horizontal (HORZ) and
vertical (VERT) resolutions using the
Although not all resolutions are guaranteed.
(5) To save the setting place the cursor on the
The horizontal and vertical positions,
clock phase and horizontal size will be
automatically adjusted and an aspect ratio will
be automatically selected.
After the INFORMATION(
displayed for about 10 seconds the screen will
return to the RESOLUTION menu displaying
the changed resolution.
(6) To revert back to the previous resolution
without saving changes place the cursor on
The screen will then return to the RESOLUTION menu displaying the
previous resolution.
• For some pictures, this function may not work well.
Description
47) will be
47) dialog has
INPUT Menu
RESOLUTION MENU
INFORMATION
RGB1
1280x 768@ 60
CUSTOM RESOLUTION
BOX
INFORMATION
RGB1
992x 744@ 60
35