Hitachi CP-X608 User's Manual And Operating Manual page 66

Hide thumbs Also See for CP-X608:
Table of Contents

Advertisement

MIU Menu (continued)
Item
SETUP
(continued)
(continued on next page)
MODE
the network communication system. Select it
according to the setting of your PC.
ADHOC
INFRASTRUCTURE
CH
of the wireless LAN while using it. Select it
according to the setting of your PC.
The channels 1 to 11 are available.
• The available channels would be various depending on a country.
In addition, wireless LAN card might be required due to the
standard.
ENCRYPTION
method to be used.
WPA2-PSK(AES)
WPA-PSK(AES)
SPEED
(M : Mbps : Megabits per second)
AUTO
54M
48M
1M
2M
5.5M
• The AUTO mode automatically selects the
optimum rate.
• Transfer rates may change due to the network
situation.
NETWORK MODE
WIRELESS
WIRED
• The network mode will be initialized whenever the power is turned
on with the power switch.
• The WIRELESS will be enabled when the wireless network card is
installed.
• The WIRED will be enabled when the wireless network card is not
installed.
Description
WPA-PSK(TKIP)
WEP 128bit
36M
24M
6M
9M
11M
MIU Menu
WEP 64bit
18M
12M
OFF
57

Advertisement

Table of Contents
loading

Table of Contents