Hitachi CP-X608 User's Manual And Operating Manual page 64

MIU Menu (continued)
Item
e-SHOT
SETUP
(continued on next page)
Selecting this item displays the e-SHOT menu.
is a still image by the e-SHOT (
(Still Image Transfer) Display of the User's
Manual - Network Functions)
ENTER button to display the image.
• Insert the SD memory card or USB memory into the projector
before you use the e-SHOT function. (
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
•
language is set to Japanese. And the characters other than alphanumeric
character are not displayed correctly in Japanese mode. (Ç, ä, etc.)
To switch the image displayed
To return to the menu
or USB memory
(1) Press the RESET button on the
remote control while displaying
an image to display the e-SHOT -
RESET menu.
(2) Press the ENTER button on the remote control or the INPUT
button on the projector to perform to erase.
projector.
Selecting this item displays the MIU SETUP menu.
or ENTER button on the remote control to perform
the item.
TURN ON TURN OFF
• Select TURN OFF when the network does not have
DHCP enabled.
Operation
4.7 e-SHOT
12)
MIU Menu
55