Setting The Daily On Timer - Hitachi AX-M136i Instruction Manual

Setting the Daily on Timer

You can use the setting timer to make the unit automatically turn on at a certain time everyday from
standby. When the setting timer is on, the timer indicator " " will be displayed. But the clock must be
correctly set for the timer to operate correctly.
1. In standby mode, press the Timer button (
blink.
2. Set the hour with the Volume Down button (
3. Press the Timer button (
4. Set the minute with the Volume Down button (
5. Press the Timer button (
button again, the "OFF" indicator will blink. Then set the daily timer to "ON" (daily timer set is in
effect) or "OFF" (daily timer set is to cancel) by pressing the Volume Down button (
Volume Up button (
Caution:
* You can set the daily timer only in standby mode.
* The operating time of every step shouldn't be longer than 3 seconds or it will return to time
display.
* The sound source on the automatic on mode is the same as the sound source the last time, the
unit was turned off by the standby switch.
* The volume automatically comes on at level 12.
To confirm the daily time
When you press the Timer button (
displayed. Wait for a few seconds until the display returns to the time display.
To cancel the daily timer setting
Repeat the previous steps for setting the daily timer until "OFF" is displayed.
Turning off the system also cancels the daily timer.
) on the remote control, the minute indicator will blink.
TIMER
) on the remote control, the selected time is set. Press the same
TIMER
).
VOL+
) on the remote control in standby mode, the daily time is
TIMER
) on the remote control, the hour indicator will
TIMER
) or Volume Up button (
VOL-
) or Volume Up button (
VOL-
- 18 -
).
VOL+
).
VOL+
) or
VOL-