Use The Ipod Portable Player; Setting The Sleep Timer - Hitachi AX-M136i Instruction Manual

Do not remove the USB device while it is being accessed.
Electrical interference and electrostatic discharges may cause the USB device to
malfunction and suffer damage, resulting in data loss.
It is strongly recommended that any important data is backed up on a PC to protect against corruption,
data loss or device malfunction. Please note that our company shall not accept any liability for
damage or loss of stored data.
Note: USB connection is not compatible with all hard drive models.

Use the iPod portable player

Correctly dock your iPod portable player in the docking. Make sure the dock adaptor is compatible.
Press the iPod button (
panel of the amplifier to select iPod source.
Playback starts automatically. You can select available features (e.g. BF,G,H etc.)
during playback.
In power on mode, directly dock your iPod portable player in the docking for charging.
Note: For the purpose of saving power, recharging of your iPod or USB device is NOT SUPPORTED
when the main set is in the STANDBY MODE.

Setting the Sleep Timer

Use the sleep timer to turn the system off after a certain number of minutes when it is playing. By
setting the sleep timer, you can fall asleep to music and know that your system will turn off by itself
rather than play all night.
1. Play a CD or tune in to the desired station.
2. To set the sleep timer press the Sleep button (
changes the number of minutes shown on the display in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the display as
before setting the sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When the Sleep button (
displayed. Wait for a second until the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the Sleep button (
Turning off the system can also cancels the sleep timer.
) on the remote control or the Function button (
iPod/AUX
- -
10 20
) on the remote control is pressed once, the remaining sleep time is
SLEEP
) on the remote control until the "00" is displayed.
SLEEP
) on the remote control repeatedly, it
SLEEP
...
80 90
- 17 -
FUNCTION
00
) on the