Input Menu - Hitachi CP-SX1350 Operating Manual

Multifunctional Settings (continued)
Multifunctional Settings (continued)

INPUT Menu

With the INPUT menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
COLOR SPACE
COMPONENT
VIDEO
3D-YCS
VIDEO NR
Select a color space mode using the
AUTO RGB
Selecting the AUTO automatically selects the optimum mode.
This item can be selected only at a RGB signal or a component video
memo
signal other than a COMPONENT port input of 525i(480i)/625i(576i)/SCART
RGB.
memo The AUTO operation may not work well at some signals. In such a case,
select a suitable mode except the AUTO.
Select a function of COMPONENT port using the
COMPONENT SCART RGB
When the SCART RGB is selected, the COMPONENT port function as a port for
a SCART RGB signal input. Please refer to the section "Connecting Your
Devices".
Select a signal type mode using the
AUTO NTSC
Selecting the AUTO automatically selects the optimum mode.
memo This item is performs only at a video signal from the VIDEO port or the S-
VIDEO port. For a component video signal, the signal type is identified
automatically independently of this function.
memo The AUTO operation may not work well at some signals. If the picture
becomes unstable (ex. a irregular picture, a color lack), please select the mode
depending on the input signal.
Select the TURN ON or the TURN OFF using the
TURN ON TURN OFF
When the TURN ON is selected, the 3D-YCS mode works for a completely still
image, or images with few motions.
memo This item performs only at a video signal of NTSC3.58.
memo When this function performs, the setting of the item "VIDEO NR" of this
INPUT menu is not effective.
Select a noise reduction level using the
HIGH MIDDLE
The noise on screen is reduced according to the selected level.
memo This item performs only at a video signal from the VIDEO port or the S-
VIDEO port. At a video signal of NTSC3.58, this function performs only when
the TURN OFF is selected to the item "3D-YSC" of this INPUT menu.
memo When this adjustment is excessive, certain degradation may appear on
the picture.
Description
/
SMPTE240 REC709
/
PAL SECAM NTSC4.43
LOW
(This table is continued to the following page.)
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK
: SELECT
buttons. :
REC601
/ buttons. :
buttons. :
M-PAL
/ buttons. :
/ buttons. :
COLOR SPACE AUTO
COMPONENT COMPONENT
VIDEO AUTO
3D-YCS TURN OFF
VIDEO NR LOW
P. INP. INPUT VIDEO
P. INP. POSIT.
POWERUP INPUT RGB
N-PAL
27