Displaying The Child Window; Selecting An Audio Input - Hitachi CP-SX1350 Operating Manual

Operating (continued)
Operating (continued)

Displaying The Child Window

This feature called "PinP (Picture in Picture)" is available only when a RGB signal is selected
memo
to main screen. And this feature does not work when UXGA (1600 x 1200) or higher signal is input.
Press the PinP button.
1
The child window with a picture of a video signal
will appear.
Press the PinP button again to change the size of
2
the child window or close the window.
Small child window
No child window
You can select the video signal to display in the
memo
child window, and the position of the child window.
Please refer to the items "P.INP. INPUT" and "P.INP.
POSIT." of the table of the section "INPUT Menu".

Selecting An Audio Input

This feature is available only when the child window is on the screen.
memo
When the child window is on the
1
screen, press the VOLUME button.
As illustrated on the right, a dialog
will appear on the screen.
Use the cursor buttons
2
select an audio input.
RGB (Audio input for the main screen)
Video (Audio input for the child window)
You also can adjust the volume using the cursor
memo
buttons
/
The Volume".
Press the VOLUME button again to close the
3
dialog and complete this operation.
Even if you don't do anything, the dialog will
memo
automatically disappear after a few seconds.
Large child window
/ to
. Please refer to the section "Adjusting
LASER INDICATOR
STANDBY/ON VIDEO
+
LENS SHIFT
–
BLANK
PREVIOUS
ESC
POSITION
MAGNFY
ON
OFF
ID CHANGE
VOLUME
RGB Video LASER INDICATOR
STANDBY/ON VIDEO
+
LENS SHIFT
–
BLANK
PREVIOUS
16
ESC
POSITION
MAGNFY
ON
OFF
ID CHANGE
RGB
+ +
FOCUS ZOOM
– –
ASPECT LASER
NEXT
MOUSE
MENU
PinP button
RESET AUTO
PinP VOLUME
FREEZE MUTE
KEYSTONE SEARCH
1 2 3
RGB
+ +
FOCUS ZOOM
– –
ASPECT LASER
Cursor
buttons
NEXT
MOUSE
MENU
RESET AUTO
VOLUME
PinP VOLUME
button
FREEZE MUTE
KEYSTONE SEARCH
1 2 3
21