Auto Menu - Hitachi CP-SX1350 Operating Manual

Multifunctional Settings (continued)
Multifunctional Settings (continued)

AUTO Menu

With the AUTO menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.
Item
Pressing the
■ For an RGB signal
■ For a video signal or s-video signal
ADJUST
■ For a video signal, s-video signal or component video signal
■ For a component video signal
memo
"AUTO IN PROGRESS" is displayed during the operation.
memo
becomes unstable (ex. a irregular picture, a color lack), please select the
suitable mode to the item "VIDEO" of the INPUT menu.
Set the time using the
POWER OFF
When the time is set to 1 to 99, the projector lamp will go off and the
STANDBY/ON indicator begins blinking when the passed time with a proper
signal (without no-signal and an unsuitable signal) reaches at the set time.
Please refer to the section "Turning Off The Power".
(or the ENTER) button performs the automatic adjustment.
The vertical position (V POSITION), the horizontal position (H POSITION), the
clock phase (H PHASE) and the horizontal size (H SIZE) will be automatically
adjusted. And the aspect ratio (ASPECT) will be automatically selected.
Make sure that the application window is set to its maximum size prior to
attempting to use this feature. Dark pictures may still be incorrectly adjusted.
Use a bright screen when adjusting.
The signal type mode best suited for the respective input signal
selected automatically.
This function is available only when the AUTO is selected to the item
"VIDEO" of the INPUT menu. For a component video signal, the signal type is
identified automatically independently of this function.
The vertical position and horizontal position will be automatically adjusted.
The aspect ratio will be automatically selected.
The clock phase will be automatically adjusted.
This operation requires approximately 10 seconds, and the message
This operation may not work well at some signals. If the picture
Long (max. 99 minutes)
POWER OFF
ENABLE
ex.
Description
/ buttons. :
Short (min. 0 minute = DISABLE)
AUTO
1min
(This table is continued to the following page.)
MENU
MAIN
ADJUST
PICTURE-1 POWER OFF
PICTURE-2
SEARCH
INPUT RESET
AUTO
SCREEN
OPTION
NETWORK
: SELECT
will be
AUTO
POWER OFF
DISABLE
0min
0 min
TURN ON
29