Figure 3. Water Level - Cornelius SERIES 750 (R404a Service Manual

WARNING: WATER LEVEL MUST BE MAINTAINED AT THE TOP OF THE EVAPORATOR.
1. Remove gearmotor and auger.
2. Adjust float valve to get water level to top seam of the evaporator.
3. Re–install auger. WATER LEVEL WILL RISE WHEN AUGER IS INSERTED BUT WHEN THE MACHINE
IS TURNED BACK ON AND ICE STARTS BEING MADE, THE WATER LEVEL WILL GO BACK TO THE
ORIGINAL SETTING.
4. Re–install gearmotor assembly and start machine.
WATER LEVEL

FIGURE 3. WATER LEVEL

7
ill224
166240009