Canon Optura 200MC Instruction Manual page 38

Downloading Still Images/Movies with the ZoomBrowser EX
7.
Confirm that [USB] and your camcorder model name are
selected and click the [OK] button.
• Thumbnail versions of the camcorder still images/movies are displayed
in the Camera Window.
Notes:
• When an enormous volume of still images/movies (such as 500 or more) is
recorded onto one memory card, transferring them to a computer may take
very long.
• In the ZoomBrowser Automation Wizard, you can set the ZoomBrowser EX
to automatically carry out an action when you start it by connecting your
camcorder to the PC with the camcorder prepared for communications.
• A dialog with the previously selected automated settings will appear the
next time you start ZoomBrowser EX.
1. To use these settings unchanged, click the [Start] button.
2. To do nothing, click [Cancel].
3. To change the settings, click [Modify Settings], select the action and click
[Finish].
• For more details, please refer to the PDF manual, "ZoomBrowser EX
Software User Guide" (
Setting the ZoomBrowser EX to Start Automatically
Use the following procedures to have ZoomBrowser EX start automatically
without showing the Event dialog.
1.
With the camcorder connected to the computer via the USB
interface, double-click the [My Computer] icon on the
desktop, followed by the [Control Panel] folder and
[Scanners and Cameras] icon or folder.
2.
Select the icon of your camcorder model.
3.
Click the [Properties] button and the [Events] tab.
• A list of application programs that can be automatically started is
displayed.
4.
Remove the check mark from all programs except
ZoomBrowser EX and click [OK].
• You have now set ZoomBrowser EX to start automatically the next time
the camcorder is connected.
• If you wish to shut off the auto start, place a check mark in the [Disable
device events] option.
38
9).