Installing/Uninstalling the USB TWAIN Driver/USB WIA Driver
Windows 2000
Installing the USB TWAIN Driver
Users of Windows 2000 must first log in as an Administrator to install the driver.
1.
Connect the Power Adapter to the camcorder.
2.
Connect the camcorder to the computer using the supplied
USB cable (
3.
Turn the POWER switch to PLAY (VCR) and move the TAPE/
CARD switch to CARD.
• After a moment, the Add New Hardware Wizard opens and
automatically installs the USB TWAIN Driver.
• If you are prompted to restart the computer, restart the computer
according to the on-screen messages.
Uninstalling the USB TWAIN Driver
Users of Windows 2000 must first log in as an Administrator to uninstall the driver.
1.
Connect the Power Adapter to the camcorder.
2.
Connect the camcorder to the computer using the supplied
USB cable (
3.
Turn the POWER switch to PLAY (VCR) and move the TAPE/
CARD switch to CARD.
• A dialog appears, allowing you to select an application program to start.
4.
Click the [Cancel] button.
• If ZoomBrowser is started, close it.
5.
Click the Windows [Start] menu and select [Settings] and
[Control Panel].
6.
Double-click the [Scanners and Cameras] icon.
• If you cannot find the [Scanners and Cameras] icon, use the procedures
on page 25 to uninstall the driver.
24
Windows 2000
36).
36).