C H A P T E R 4 Configuring Settings On The Cisco Unified Ip Phone; Configuration Menus On The Cisco Unified Ip Phone; Displaying A Configuration Menu; Unlocking And Locking Options - Cisco 6921 - Unified IP Phone Standard VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
•
•

Unlocking and Locking Options

You can apply a password to the phone so that no changes can be made to the administrative options on
the phone without the password being entered on the Admin Settings phone screen.
To apply a password to the phone, in Cisco Unified Communications Manager administration, navigate
to the Common Phone Profile Configuration window (Device > Device Settings > Common Phone
Profile). Enter a password in the Local Phone Unlock Password option. Apply the password to the
common phone profile that the phone uses.
Related Topics
•
•
•
•

Editing Values

When you edit the value of an option setting, follow these guidelines:
•
•
•
•
•
•
The Cisco Unified IP Phone provides several methods you can use to reset or restore option settings, if
Note
necessary. For more information, see the
on page
Related Topics
•
•
•
•
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
OL-19025-01
Network Setup Menu, page 4-4
IPv4 Setup Menu Options, page 4-6
Displaying a Configuration Menu, page 4-2
Editing Values, page 4-3
Network Setup Menu, page 4-4
IPv4 Setup Menu Options, page 4-6
Use the keys on the keypad to enter numbers and letters.
To enter letters by using the keypad, use a corresponding number key. Press the key one or more
times to display a particular letter. For example, press the 2 key once for "a," twice quickly for "b,"
and three times quickly for "c." After you pause, the cursor automatically advances to allow you to
enter the next letter.
To enter a period (for example, in an IP address), press * on the keypad.
Press the up arrow on the navigation bar to move the cursor to the left most character, and press the
down arrow on the navigation bar to move the cursor to the right most character.
Press if you make a mistake. This softkey deletes the character to the left of the cursor.
Press the Cancel softkey before pressing the Save softkey to discard any changes that you have
made.
9-10.
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Network Setup Menu, page 4-4
Network Setup Menu, page 4-4

Configuration Menus on the Cisco Unified IP Phone

"Resetting or Restoring the Cisco Unified IP Phone" section
4-3