Cisco 6921 - Unified IP Phone Standard VoIP Administration Manual page 150

Installing the Bracket
Attach the phone bracket to the IP phone
Step 2
Detach the handset cord (and headset cord, if there is a headset), power cord, and any other attached
a.
cords from the base of the phone.
Removethe label covers that are concealing the screw holes.
b.
Attach the phone bracket by inserting the tabs into the mounting tabs on the phone. The phone's
c.
ports should be accessible through the holes in the bracket.
d. Secure the phone bracket to the IP Phone with the machine screws.
Thread the handset cord (and headset cord, if using one). Reattach the cords and seat them in the
e.
clips incorporated into the phone body.
Figure E-3
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP)
E-4
Appendix E Installing the Wall Mount Kit for the Cisco Unified IP Phone 6921, 6941, and 6961
(Figure
Attaching the Phone Bracket
Screw holes
E-3).
Slot for
mounting tabs
OL-19025-01