Compaq iPAQ Networking User And Setup Manual page 11

Note:
The cable length between your Ethernet Switch and hub/PC
should not exceed 100 meters. If you will operate at 10 Mbps
speed, use a Category 3 or 5 cable. If you will run your
network at 100 Mbps, use a Category 5 cable or better.
Note:
Any type of hub or PC can connect to your Ethernet Switch by
using straight-through wires (not included). You can connect
your Ethernet Switch to other hubs or switches using any port
as an uplink port, increasing the number of PCs you can add
to your network.
PAQ N 5 P
I ETWORKING
10/100 F E
ORT AST
A S
THERNET UTO ENSING
2
3
S
WITCH
11