Table of Contents
Advertisement
13. QLA4010 iSCSI boards booting from external storage require "Spanning Tree" features to be disabled on network switches used in the boot path.
14. Microsoft Initiator software version 2.0 and later automatically forces IQN's to lower−case. This may require array−side host access reconfiguration.
15. Configuration utility for QLogic iSCSI HBAs is QLogic SANsurfer available at http://www.qlogic.com
16. QLogic iSCSI HBAs are supported in any server listed in the ESM Fibre Channel tables that list support for the QLA2340 HBAs with the same operating system version listed here.
17. PowerPath 5.0.0 is not supported with Microsoft iSCSI Initiator software and Microsoft Cluster Server (MSCS)
18. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator.
19. BIOS 1.11
20. Servers booting from external storage with QLA4010 iSCSI boards require Microsoft iSCSI Initiator 2.0 or 2.02 service to be installed. Note that HBA IQN must be altered prior to
Windows installation. Refer to EMC Host Connectivity Guide for information on changing IQN and setting up boot for servers requiring MS iSCSI Initiator service.
21. Driver Version 2.1.3.21
22. Driver Version 2.1.3.22
23. Firmware Version 3.0.0.16
24. BIOS 1.14
25. QLogic iSCSI HBAs require the Microsoft iSCSI Software Initiator Service to be installed. The Service is required by Microsoft and is different from the full Microsoft iSCSI Software
Initiator. Refer to the EMC Host Connectivity guide for additional information on Windows iSCSI components and the Microsoft iSCSI Software Initiator usage.
26. Driver Version 2.1.4.12
27. Firmware Version 3.00.01.49
28. This iSCSI Exp Card DOES NOT support on the IBM blade server types HS21(7995,8853)
29. BIOS 1.09a
30. Firmware Version 2.00.00.45
31. Driver Version 2.1.3.28
Microsoft Windows 2003 [x64]
No.
Operating System
1
Microsoft Windows 2003 [x64]
Enterprise: Edition, Edition R2,
Edition R2 SP2, Edition SP2;
Microsoft Windows 2003 [x64]
Standard: Edition, Edition R2,
Edition R2 SP2, Edition SP2
2
Microsoft Windows 2003 [x64]
Enterprise: Edition, Edition R2,
Edition R2 SP2, Edition SP2;
Microsoft Windows 2003 [x64]
Standard: Edition, Edition R2,
Edition R2 SP2, Edition SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise:
Edition, Edition R2 SP2, Edition
31
R2
, Edition SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard: Edition,
31
Edition R2 SP2, Edition R2
,
Edition SP2
3
Microsoft Windows 2003 [x64]
Enterprise: Edition, Edition R2,
Edition R2 SP2, Edition SP2;
Microsoft Windows 2003 [x64]
Standard: Edition, Edition R2,
Edition R2 SP2, Edition SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise:
Edition, Edition R2 SP2, Edition
31
R2
, Edition SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard: Edition,
31
Edition R2 SP2, Edition R2
,
Edition SP2
4
Microsoft Windows 2003 [x64]
Enterprise: Edition, Edition R2,
Edition R2 SP2, Edition SP2;
Microsoft Windows 2003 [x64]
Standard: Edition, Edition R2,
Edition R2 SP2, Edition SP2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise:
Edition, Edition R2, Edition R2
SP2, Edition SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard: Edition,
Edition R2, Edition R2 SP2,
Edition SP2
5
Microsoft Windows 2003 [x64]
Enterprise: Edition, Edition R2;
Microsoft Windows 2003 [x64]
Standard: Edition, Edition R2;
Microsoft Windows 2003 [x64]
Storage Server Enterprise:
Edition, Edition R2 SP2, Edition
31
R2
, Edition SP2;
Microsoft Windows 2003 [x64]
Storage Server Standard: Edition,
31
Edition R2 SP2, Edition R2
,
Edition SP2
1. EMC provides documentation for iSCSI configurations that contains helpful information for using iSCSI with EMC storage. Visit EMC Powerlink and download part number
300−000−603 for the Windows Host Connectivity Guide.
2. Powerpath iSCSI 1.1 is supported with Windows 2003 operating systems.
3. Microsoft Dynamic Disks are not supported.
4. Powerpath 4.3.1 or higher is supported. All paths may be on a single subnet, or multiple subnets may be used.
5. Routed networks (layer 3) require iSCSI digest to be enabled.
03/04/2009
Microsoft Windows 2003 [x64]
Host Bus Adapter
HPQ Qlogic QMH4062 1GbE iSCSI HBA for HP c−Class BladeSystem
14, 16, 23
(488074−B21)
7, 8, 9, 10, 11, 12, 13
Generic NIC GbE
10, 11, 14, 15, 16, 17, 18, 19, 20, 28, 29, 30
QLogic QLA4050−E−SP
10, 11, 14, 15, 16, 17, 18, 19, 20, 28, 29, 30
QLA4050C−E−SP
10, 11, 14, 15, 16, 17, 18, 19, 20
QLE4060C−E−SP
11, 14, 15, 16, 17, 18, 19, 20
7, 8, 9, 10, 11, 24
Generic NIC GbE
10, 17, 18, 20, 29, 30, 32, 33, 34, 35
QLogic QLA4010−E−SP
10, 17, 18, 20, 29, 30, 32, 33, 34, 35
QLA4010C−E−SP
Network
Configuration
LAN Only
LAN Only
, QLogic
LAN Only
, QLogic
10,
, QLogic QLE4062C−E−SP
LAN Only
, QLogic
LAN Only
999
Storage
External
Array
Boot
Comments
5, 6
22
2, 3, 4
EMC
Y
See
CLARiiON
21
AX150i
5, 6
1, 2, 3, 4
EMC
N
See
CLARiiON
AX150i
5, 6
2, 3, 4
EMC
N
See
CLARiiON
21
AX150i
5, 6
22, 25,
1, 2, 3, 4
EMC
Y
See
CLARiiON
26, 27
21
AX150i
5, 6
2, 3, 4
EMC
N
See
CLARiiON
21
AX150i
CLARiiON AX150i
CLARiiON AX150i
Hide quick links:
Advertisement
Table of Contents
