Table of Contents
Advertisement
Troubleshooting
If the camera fails to function as expected, check the list of common problems below before
consulting your retailer or Nikon-authorized service representative.
Power, Display, Settings Issues
Problem
The camera is on but does
not respond.
Camera turns off without
warning.
Monitor is blank.
F8
Cause/Solution
• Wait for recording to end.
• If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert
the battery or batteries or, if you are using an AC
adapter, disconnect and reconnect the AC adapter.
Note that although any data currently being
recorded will be lost, data that have already been
recorded will not be affected by removing or
disconnecting the power source.
• Battery is exhausted.
• Camera has turned off automatically to save power.
• The camera and batteries have become too cold
and cannot operate properly.
• Camera is off.
• Battery is exhausted.
• Standby mode for saving power: press the power
switch, the shutter-release button, A button,
c button, or b (e movie-record) button.
• The flash lamp flashes while the flash is charging.
Wait for the flash to charge.
• Camera and computer are connected via USB
cable.
• Camera and TV are connected via audio/video
cable or HDMI cable.
A
–
14, 15, 23,
E95
22
98, E81
F4
23
22
2, 23
55
80, 85
80, E27
Advertisement
Table of Contents
