Table of Contents
Advertisement
Error Messages
Display
O
(flashes)
Battery exhausted.
The camera will turn off
to prevent overheating.
Q
(flashes in red)
Please wait for the
camera to finish
recording.
Memory card is write
protected.
Not available if Eye-Fi
card is locked.
This card cannot be
used.
This card cannot be
read.
Cause/Solution
Clock not set.
Set date and time.
Replace the batteries.
Inside of the camera has become hot.
The camera turns off automatically. Allow the camera to cool
down before turning it on again.
Camera cannot focus.
• Refocus.
• Use focus lock.
Wait until the image is saved and the message disappears
from the display.
Write-protect switch is in "lock" position.
Slide write-protect switch to "write" position.
Eye-Fi card write-protect switch is in "lock" position.
Slide write-protect switch to "write" position.
Error accessing Eye-Fi card.
• Check that terminals are clean.
• Confirm that the card is correctly inserted.
Error accessing memory card.
• Use approved card.
• Check that terminals are clean.
• Confirm that the card is correctly inserted.
A
E70
14
–
28, 72
71
–
–
–
16
16
F21
16
16
E97
Advertisement
Table of Contents
