Table of Contents
Advertisement
Using the Flash (Flash Modes)
In dark locations or when the subject is backlit, you can take pictures with the flash by raising
the flash.
When using A (auto) mode and other shooting modes, you can set the flash mode.
1
Slide the K (flash pop-up) control.
• The flash pops up.
• The flash does not fire while it is lowered. W is displayed to indicate that the flash does not
fire.
2
Press the multi selector H (m flash mode).
3
Press H or I to select the desired mode and
then press the k button.
• Available Flash Modes ➝ A 54
• If a setting is not applied by pressing the k button within
a few seconds, the selection is canceled.
• When U (auto) is applied, D is only displayed for a
few seconds, regardless of Monitor settings (A 98,
E73).
Auto
53
Advertisement
Table of Contents
