Table of Contents
Advertisement
Operating Instructions
9084 Processing Error Troubleshooting
Table 3-5
Troubleshooting Processing Errors by Symptom
Symptom
• DashBoard™ shows Video
yellow icon and Input Invalid
message in 9084 Card Info
pane.
• Card edge Input Format LEDs
show continuous cycling.
• DashBoard™ shows Frame
Sync red icon and Reference
Invalid message in 9084 Card
Info pane.
• Card edge red ERR indicator
illuminated.
9084-OM (V4.0)
Table 3-5 provides 9084 processing troubleshooting information. If the 9084
card exhibits any of the symptoms listed in Table 3-5, follow the
troubleshooting instructions provided.
In the majority of cases, most errors are caused by simple errors where the
9084 is not appropriately set for the type of signal being received by the card.
Note:
The error indications shown below are typical for the corresponding error con-
ditions listed. Other error indications not specified here may also be displayed
on DashBoard™ and/or the 9084 card edge status indicators.
Note:
Where errors are displayed on both the 9084 card and network remote con-
trols, the respective indicators and displays are individually described in this
section.
Error/Condition
No video input present
Frame sync reference not
properly selected or not being
received
9084 PRODUCT MANUAL
Corrective Action
Make certain intended video source is
connected to appropriate 9084 card video input.
Make certain BNC cable connections between
frame Rear I/O Module for the card and signal
source are OK.
• If external frame sync reference is not
intended to be used, make certain the
Framesync Enable selection list is set to Off
or Input Video as desired.
• If external frame sync reference is intended to
be used, make certain selected external
frame sync reference is active on frame sync
8310 frame bus. (External reference signals
Reference 1 and Reference 2 are distributed
to the 9084 and other cards via an 8310
frame bus.) Refer to Framesync function
submenu tab on page 3-22 for more
information.
Troubleshooting
3-39
Advertisement
Table of Contents
Troubleshooting
