Dashboard™ User Interface - Cobalt Digital Inc 9084 Product Manual

Operating Instructions
DashBoard™ User Interface
9084-OM (V4.0)
The timeout period from when a menu is entered to when the display times
outs (reverts to the default card model display) can be adjusted from 5 to 9999
seconds (166.7 minutes) as described below.
Access the Displ (Display) menu.
1.
Use the up/down switch to enter the desired timeout value as shown
2.
below.
Card Edge Control Menu:
Disp
1 2
TOUT
(value)
(See Figure 3-5.) The 9084 function submenus are organized in DashBoard™
using tabs (for example, "Color Correction" in Figure 3-5). When a tab is
selected, each parametric control or selection list item associated with the
function is displayed. Scalar (numeric) parametric values can then be adjusted
as desired using the GUI slider controls. Items in a list can then be selected
using GUI drop-down lists. (In this manner, the setting effected using controls
and selection lists displayed in DashBoard™ are comparable to the submenu
items accessed and committed using the 9084 card edge controls.)
Figure 3-5 shows the same setup described in Figure 3-3 as performed using
DashBoard™. Note how this setup is greatly simplified using DashBoard™
with most of the discrete tasks (
with the card edge controls now rolled into simple actions using
DashBoard™.
9084 PRODUCT MANUAL
Control and Display Descriptions
Timeout value (in seconds)
through
A I
in Figure 3-3) performed
3-7