Ancillary Data Line Number Locations And Ranges - Cobalt Digital Inc 9084 Product Manual

Operating Instructions

Ancillary Data Line Number Locations and Ranges

Table 3-1 9084 Ancillary Data Line Number Locations/Ranges
Item
AFD
ATC_VITC
ATC_LTC
SDI VITC Waveform
Closed Captioning
Notes:
1. The card does not check for conflicts on a given line number. Make certain the selected line is available
and carrying no other data.
2. While range indicated by drop-down list on GUI may allow a particular range of choices, the actual range
is automatically clamped (limited) to certain ranges to prevent inadvertent conflict with active picture area
depending on video format. Limiting ranges for various output formats are as follows:
Format
525i
625i
SD ATC_VITC = 12
SD VITC
Waveform = 14/16
CC = 21
Card 1
SD ATC_VITC = 12
SD VITC
Waveform = 14/16
CC = 21
Card 1
9084-OM (V4.0)
Table 3-1 lists the default output video VANC line number locations for
various ancillary data items processed or passed by the card.
SD
12 (Note 2)
12 (locked)
—
14/16 (Note 2)
21 (locked)
Line No. Limiting Format
12-19 720p
9-22 1080i
Because line number allocation is not standardized for all ancillary items,
consideration should be given to all items when performing set-ups. Figure
3-8 shows an example of improper and corrected VANC allocation within a
525i5994 SD-SDI stream.
AFD Insertion
attempted using
VANC line 12
(default)
AFD Insertion
corrected to use
VANC line 18
Figure 3-8 Example VANC Line Number Allocation Example
9084 PRODUCT MANUAL
Ancillary Data Line Number Locations and Ranges
Default Line No. / Range
9 (Note 2)
9/8 (Note 2)
10 (Note 2)
—
10 (Note 2)
Line No. Limiting Format
9-25 1080p
9-20
SD ATC_VITC = 12
AFD = 12
SD VITC
Waveform = 14/16
CC = 21
Card n
SD ATC_VITC = 12
SD VITC
Waveform = 14/16
AFD = 18
CC = 21
Card n
HD
Line No. Limiting
9-41
Conflict between fixed
SD ATC_VITC and added
AFD both on VANC line 12
Conflict between fixed
SD ATC_VITC on line 12
and AFD (now on line 18)
resolved
3-13