Configuration; Tv Type; Tv Out; Vcr Out - Hitachi HDR253 Instruction Manual

6.2. CONFIGURATION

You can configure the settings of your
set top box. Select Configuration from
Setup menu and press OK to enter this
menu. Press the BACK button on the
remote to exit

6.2.1. TV TYPE

Digital terrestrial television channels can
broadcast programmes in a widescreen
format which must be output differently
to normal and widescreen TV sets. This
function tells the receiver the screen
format of the TV connected so that
broadcasts are displayed correctly.
Highlight the TV Type line in the
Configuration menu and use the keys to select "4:3" if you have a standard TV set connected
"3/4"
or "16:9" if it is a widescreen TV. This function duplicates the selection made at the time of first
installation and can be used if you change TV sets.
NB.: If you choose "Auto", the TV type will be set automatically according to the broadcasted
programme.

6.2.2. TV OUT

The receiver can output RGB, CVBS and S-Video signal from the TV SCART on the rear panel.
Although the RGB format results in a better quality picture, not all equipment can cope with an RGB
signal.

6.2.3. VCR OUT

This allows you to select CVBS or S-Video output from the VCR SCART socket.The receiver can
output SVideo and CVBS signal from the VCR SCART on the rear panel.

6.2.4. HDMI RESOLUTION

This receiver can give HDMI output in 3 different resolutions: 576p, 720p and 1080i from the HDMI
connector on the rear panel. In order to get best picture quality, please check the HDMI resolutions
supported by your TV set and select the most appropriate one from this menu. Note that only stored
channels can be watched over HDMI, not VCR input. This function duplicates the selection made at
the time of first installation.

6.2.5. LOW POWER OPTION

If you select YES, low power mode will be activated. In low power mode the power consumption is
less then 3 W (in standby). The front display will show no time information (in standby). If low power
mode is deactivated, all functions will be reactivated.

6.2.6. FAVOURITE MODE

This function enables or disables the 5 favourite channel list mode by pressing " / " buttons. If a
favourites list exists it will switch to the list number selected. If there is no favourite listing, a warning
message is displayed.
29