Menu Interface; First Time Installation; Main Menu - Hitachi HDR163 ARGOS Instruction Manual

MENU INTERFACE

FIRST TIME INSTALLATION

When the box is switched on from stand-by mode and if there is no channel stored in the database,
First Time Installation Menu window is displayed on the screen. In this window, set the TV type (For
more information, look at section 6.2.1. TV TYPE) with "3/4" keys and press OK to continue.
The next menu will ask you to choose the HDMI resolution. If you intend just using the Scart output
then just press OK and continue the scanning process.
Using the [LEFT] or [RIGHT] keys on the remote control, you can select between 576p, 720p and
1080i. Please check the HDMI resolutions supported by your TV set and select the most appropriate
one from this menu. The next menu will ask you, if you want to begin with the automatic channel scan.

MAIN MENU

Main menu is accessed by pressing the MENU key on the remote
control. Navigate with "5/6" keys among the menus and press OK to
activate menus. In some sub-menus, press the BACK button to return to
the previous menu, otherwise, use it to exit from the menu. In all menus
there is an Info banner at the bottom of the screen. These are functions
that can be used in the current menu.
15