Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power cord to the system. Press Power
On/Off switch. Then the TV switches itself to
stand-by mode (optional).
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected, or Press the "-P/CH"
or "P/CH+" button on the TV or press the P+ or P-
button on the remote control, so that last mode
switched off is selected.
By either method the TV will switch on.
To switch the TV off:
• Press the "
(stand-by)" button on the remote con-
trol or On/Off switch on the TV, so the TV will switch
to stand-by mode.
To power down the TV completely, press On/Off
Unplug the power cord from the mains socket.
Navigating the Menu System
to display the menu.
button to select an icon.
button to highlight. Press
options in analogue TV mode. UseOK in DTV mode
for viewing a submenu.
buttons to change the settings. Press
OK to set as default.
5- To exit the menu or return from sub-menu screen,
These explanations are available for the navigation
of the whole menu system. To select options that are
explained in the following parts, refer to "Navigating
The Menu System".
To Confirm Choices
When the TV is turned on for the first time, Auto
Programme menu will be displayed on the screen
Because this is the first time the TV is used, there are no
channels stored in the memory and the following message
appears on the screen.
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
to highlight "Language" item. Use
button to set "Language". Use
tons to select "TXT Language" and set it by using
buttons. Press "OK" button to continue:
For more information on this process, see "Install
You can operate your TV using both the remote
control and onset buttons.
Operation with the buttons on the TV
- button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed at the middle of the bottom
on the screen.
• Press P/CH + button to select the next programme or
P/CH - button to select the previous programme.
Entering Main Menu
• Press the MENU button to enter Main menu. In the
Main menu select sub-menu using P/CH - or P/CH +
buttons and enter the sub-menu using
+ buttons. To learn the usage of the menus, refer to
the Menu System sections.
GB - 12 -
button, adjust the Country item