justments of Contrast, Brightness, Sharpness, Colour,
Reset and Store items in this part are identical with
Picture menu in the Menu System. Refer to Picture
menu explanations in the previous parts.
Select PAP Source item by using
button to set PAP source.
Note: When main picture source is TV, AV-1, AV-2
or AV-3, PIP window can only be set to
HDMI-1, HDMI-2, YPbPr (AV-5), PC source or vice
Select PAP SWAP item by using
button. This function enables to swap between
the main and the PAP picture.
Note: See Appendix C for all PIP/PAT modes.
select Sleep Timer. Press
button to set the Sleep Timer.
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
select Child Lock.
button to set the Child Lock on or off.
When on is selected, the TV can only be controlled by
the remote control handset. In this case the control
panel buttons will not work (except for the STANDBY
button). Hence, if one of these buttons is pressed,
"Child Lock On" will be displayed on the screen when
the menu screen is not visible.
button, select Language.Use
button to select the language. Available language
options are; English, French, German, Italian, Span-
ish, Portuguese, Dutch, Greek, Swedish, Norwegian,
Danish, Finnish, Turkish, Croatian, Slovenian, Polish,
Czech, Hungarian, Russian, Bulgarian, Greek, Slo-
select AV-2 Out.Use
to set AV-2 Out to TV, AV-1, AV-3, FAV, YPbPr Au-
dio or PC Audio.
Note: When TV Source is set to HDMI, HDMI Audio
setting will be available among AV-2 Out options.
PC Audio In
select Pc Audio In.By pressing
button, you can change the PC Audio In to TV, ,
AV-1, AV-2, AV-3, FAV, YPbPr Audio, PC Audio.
GB - 16 -
You can set the TV to automatically change to a blue
screen if the signal is weak or absent, or when there
is no input from an external device.
The Blue Background feature can be turned on or off
button, select Menu Background.
Transparency level is adjusted by pressing
button to change menu timeout to 15 sec,
30 sec or 60 sec.
button, select Teletext Language.
button to change Teletext Language to
West, East, Turk/Greek,Cyrillic, or Arabic.
Default zoom is a feature that provides the zoom mode
of the TV set to be switched to the selected default
zoom mode (Panoramic, 4:3 ,14:9 zoom) in case no
WSS or 4:3 signal by end-user.
button, select Default Zoom. You ou
can set Default Zoom to Panoramic, 4:3 or 14:9 Zoom
button, select Menu Timeout.