Download  Print this page

Other Features; Tv Status; Mute Indicator; Pip And Pap Modes - Hitachi L32A01 A Instructions For Use Manual

Lcd colour television
Hide thumbs

Advertisement

Other Features

TV Status

Programme Number,
Sound Indicator and Zoom Mode are displayed
on the screen when a new programme is entered.

Mute Indicator

It is placed in the upper side of the screen when
enabled.
To cancel mute, there are two alternatives; the first
one is pressing the
increasing the volume level.

PIP and PAP Modes

PIP picture is displayed on the screen by pressing
button . At PIP Mode, a small picture (PIP picture)
is displayed in the main picture.
When PIP Mode is entered, the default active window
is PIP window and the active window is indicated by
a red frame around it. The active window can be
changed by pressing
PIP position can be changed by pressing
tons.
When
button is pressed again, the TV switches
to PAP mode. In PAP Mode, two pictures with equal
sizes are displayed on the screen. Aspect Ratios of
the windows are fixed.
When you switch to PAP Mode, main window in PAP
Mode is displayed on the right side of the screen. The
active window can be changed by pressing
button.
Press the
button again to exit the PAP mode.
Note: When main picture source is TV, AV-1, AV-2,
AV-3 or AV-4; PAP or PIP window can only be
set to HDMI-1, HDMI-2, YPBPR, PC source or
vice versa.

AV Modes

You can switch your TV to AV modes by using re-
lated buttons on the remote control.
button till INPUT OSD is displayed
First, press
on the screen. You can then use; AV1, AV2, AV3,
AV4, AV5, HDMI1 or HDMI2 buttons on your remote
control to select the desired source (except being in
teletext).
Note that in PIP/PAP modes, pressing
will directly change sources.
Programme Name,
Mute
button and the second one is
/
buttons.

Zoom Modes

Zoom mode can be changed by pressing the
button. You can change the screen size according to
the picture aspect ratio. Select the optimum one from
the following ZOOM modes.
Note:
• In YPBPR and HDMI modes, while in 720p-1080i
resolutions, only FULL mode is available.
• In PC mode, only 4:3 and 16:9 modes are available.

Auto

When a WSS (Wide Screen Signalling) signal,
which shows the aspect ratio of the picture, is in-
cluded in the broadcast signal or the signal from an
external device, the TV automatically changes the
ZOOM mode according to the WSS signal.
• When the AUTO mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, change to another ZOOM
mode manually.
Zoom
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen.
/
but-
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the Full mode to restore the picture to its original
shape.
/

Cinema

This zooms up the wide picture (16:9 aspect ratio) to
the full screen.
16:9 Zoom
This zooms up the wide picture (16:9 aspect ratio) to
the full screen.

Subtitle

button
This zooms up the wide picture (16:9 aspect ratio)
with subtitles to the full screen.
GB - 20 -

Advertisement

Table of Contents
loading

  Related Manuals for Hitachi L32A01 A