Cd Operations - Clarion M455A Owner's Manual

CD Operations

Loading a CD
Insert a CD into the center of the [CD SLOT]
with the label side facing up. "CD" or
"LOADING" appears on the display, the CD
enters into the slot, and play starts.
For CD (12 cm)
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
• Discs not bearing the
cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the center of the insertion
slot.
Ejecting a CD
1. Press the [Q] button to eject the CD,
"EJECT" appears on the display, take it out
from the ejected position.
Notes:
• Forcing a CD into the CD mechanism can
damage the CD or source unit.
The CD will automatically load after being placed
approximately 1/3rd of the way into the CD
mechanism.
• If a CD (12 cm) is left in the ejected position for
15 seconds, the CD is automatically reloaded
(Auto reload).
• 8 cm CDs are not auto reloaded. Be sure to
remove it when ejected.
Listening to a CD already inserted
Press the [SRC] button to select the CD mode.
Play starts automatically. If no CD is loaded in
the unit, "NO DISC" appears in the display.
Pausing play
1. Press the [ ] button to pause play. "PAUSE"
appears in the display.
For single CD (8 cm)
CD SLOT
mark and CD-ROMs
2. To resume CD play, press the [
again.
Selecting a track
●Track-up
1. Press the [∂] button to move ahead to the
beginning of the next track.
2. Each time you press the [∂] button, the
track advances ahead to the beginning of the
next track.
●Track-down
1. Press the [å] button to move back to the
beginning of the current track.
2. Press the [å] button twice to move to the
beginning of the previous track.
Fast-forward/fast-rewind
●Fast-forward
Press and hold the [∂] button for 1 second or
longer.
●Fast-rewind
Press and hold the [å] button for 1 second or
longer.
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This
function continues on the disc until it is
cancelled.
∗ The scan play is useful when you want to select a
desired track.
1. Press the [SCN] button.
2. To cancel the scan play, press the [SCN]
button again.
Repeat play
Repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Press the [RPT] button.
2. To cancel the repeat play, press the [RPT]
button again.
] button
19
M455A