Cisco CX-FEIP-1FX= Installation and con?guration Installation Manual page 12

Installation Prerequisites
What Is the Cisco 7500 Series?
The Cisco 7500 series includes the Cisco 7505, Cisco 7507, and Cisco 7513 routers. The FEIP
operates in the Cisco 7500 series routers. (For software and hardware requirements, refer to the
section "Software and Hardware Prerequisites" on page 3.)
Network interfaces reside on modular interface processors, including the FEIP, which are inserted
into interface processor slots and provide a direct connection between external networks and the
high-speed CyBus in the Cisco 7500 series. The Cisco 7500 series supports any combination of
available network interface types.
In the 5-slot Cisco 7505 (see Figure 5), slots 0 through 3 are for interface processors including the
FEIP.
Figure 5
Power switch
12 Fast Ethernet Interface Processor (FEIP) Installation and Configuration
Cisco 7505 (Interface Processor End)
Chassis
grounding
receptacles
Power receptacle
RSP slot
Interface processor slot 3
Interface processor slot 2
Interface processor slot 1
Interface processor slot 0
DC OK LED
AC-input power supply