Lightolier 603MR Specification

Page 1 of 1 Recessed Linear Low Voltage 3 x MR16 Ceiling Opening: 5 3/8" (137mm) x 16 7/8" (428mm)
7 3/8"
6 3/4"
Complete fixture consists of Reflector Trim (3 needed), Frame-in Kit and Face Plate. Select each separately
Reflector Trim
404X series Alzak Cones
405X series Painted Baffles
406X series Eyeball
409X series
Pinhole
413X series Gimbal
478X series Elbow
Features
1. Housing / Plate: Die-formed 20 ga. steel ; Black painted finish.
Accommodates all ceilings up to 2" (51mm) thick. Adjustable from inside.
Concealed wiring channel.
2. Face Plate: Die-formed 20 ga. steel ; White painted finish. Inner Mounting
ring welded of dimmers can further amplify the sound levels.to plate to
accept 400 series trims. 1/4" (7mm) lip all around.
3. Mounting Brackets: 16 ga. steel. Use 18" (457mm) mounting bars(optional)
or with standard 3/4" (19mm), 1-1/2" (38mm) lathing channels (by others)or
1/2" (13mm) tubing (by others). Adjust horizontally and vertically.
4. Junction Box: 14 ga. steel, 5" (127mm) x 3-1/2" (89mm) x 1 1/2"
(38mm)deep box, allows inspection from below. CSAUS certified for through
branch circuit wiring with maximum of 8 (#12ga.), 90º C conductors.
5. Transformer: Magnetic 150VA (Class "B") and 75VA (Class "H"),
120/277/347volt primary, nominal 12 volt secondary.
6. Thermal Protector: Meets CSA/UL requirements. Insulation, if used, must
be kept 3" away from luminaire sides and junction box. Do not cover top of
luminaire.
7. Socket: Porcelain body ; Two-pin (GX5.3 base) Pre-wired with 18 ga.
Teflon250º leads to junction box.
Markings
CSA,US ; Certified for damp locations.
Lytecaster Recessed Downlighting
Frame-In Kit
35"
16 7/8"
Frame-In Kit
603MR120
603MR277
2"
6 3/4"
Face Plate
603WH
Accessories
1950 - 18" Mounting Bar
1951- 31" Mounting Bar
FA10251-WH - Replacement Spacer Ring
Note
Magnetic transformers may produce audible sound which may be
objectionable in acoustically critical areas. The use of dimmers can further
amplify the sound levels.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • C0711
603MR
Face Plate
18 5/8"
Lamp
3 x 75W MR16
3 x 75W MR16
3 x 75W MR16
3 x 65W MR16
3 x 75W MR16
3 x 75W MR16
Type:
www.lightolier.com