Specifications; Into Use; Safety Information - Chicago Electric 67707 Set Up And Operating Instructions Manual

SpecificationS

Charger Input 120 VAC
Battery Type 12 V Lithium, 1.3 Ah
Motor Speed 15,000 OPM (No Load)
Sandpaper (2 pieces for wood
and 2 pieces for metal)
Sanding Pad
Accessories
Cutting Blade
Scraper Blade
Hex Wrench
unpacKing
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
Accessory Attachments - This multi-
purpose tool includes Sandpaper (504) and
a Sanding Pad (503) for sanding wood or
removing paint from surfaces, a Cutting
Blade (502) to cut wood and soft metal such
as copper piping, and a Scraper Blade (501)
which can be used for scraping paint or wall
paper from flat surfaces.
inStructionS for putting

into uSe

read the entire important

SafetY information

section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
from accidentaL
operation:
turn the power Switch off and
remove the Battery pack before
Page 8
to preVent
SeriouS injurY
for technical questions, please call 1-800-444-3353.
assembling or making any
adjustments to the tool.
note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
components
Tool
Scraper Blade
(501)
Hex
Wrench
(505)
figure 1
read the entire important
SafetY information
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
Case (507)
Cutting Blade
(502)
Sandpaper
(504)
Charger
(506)
Set up
SKU 67707
Battery
Pack
Sanding
Pad
(503)