Table of Contents
Advertisement
c.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
d.
use the power tool and accessories
in accordance with these
instructions, taking into account the
working conditions and the work
to be performed. Use of the power
tool for operations different from those
intended could result in a hazardous
situation.
7.
Battery tool use and care
a.
recharge only with the charger
specified by the manufacturer. A
Charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
b.
use power tools only with
specifically designated battery
packs. Use of any other battery packs
may create a risk of injury and fire.
When battery pack is not in use, keep
c.
it away from other metal objects,
like paper clips, coins, keys, nails,
screws or other small metal objects,
that can make a connection from
one terminal to another. Shorting the
battery terminals together may cause
burns or a fire.
under abusive conditions, liquid
d.
may be ejected from the battery;
avoid contact. if contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
8.
Service
a.
have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
Page 4
for technical questions, please call 1-800-444-3353.
multifunction tool Safety Warnings
1.
Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
2.
Do not use this Multifunction Tool with
any other Battery or Charger.
3.
Avoid unintentional starting. Prepare to
begin work before turning on the tool.
4.
CAUTION: Avoid accidental injury. Keep
hands and fingers safely away from the
oscillating Scraper, Cutting Blade, and
Sandpaper when operating the tool.
5.
Avoid unintentional starting. Prepare to
begin work before turning on the power
tool.
6.
Do not lay the tool down until it has come
to a complete stop. Moving parts can
grab the surface and pull the tool out of
your control.
7.
When using a handheld power tool,
maintain a firm grip on the tool with both
hands to resist starting torque.
8.
Do not leave the tool unattended when
the battery pack it installed. Turn off the
tool, and remove the battery pack before
leaving.
9.
The battery pack and Charger
get hot during use. The
pack's heat can build up to
unsafe levels and create a fire
hazard if it does not receive adequate
ventilation, due to an electrical fault, or if
it is used in a hot environment.
Do not place the Battery Pack on a
flammable surface. Do not obstruct any
vents on the Battery Pack. especially
avoid placing the Battery pack on
carpets and rugs; they are not only
SKU 67707
Hide quick links:
Advertisement
Table of Contents
