Table of Contents
Advertisement
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result
in serious personal injury.
b.
use personal protective equipment.
always wear eye protection. Safety
equipment such as a dust mask,
non-skid safety shoes, a hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
c.
prevent unintentional starting.
ensure the power Switch is in the off-
position before connecting to power
source and/or battery pack, picking
up or carrying the tool. Carrying
power tools with your finger on the
power switch invites accidents.
d.
remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to any part
of the power tool may result in personal
injury.
e.
do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool
in unexpected situations.
f.
dress properly. do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from
moving parts. Loose clothes, jewelry
or long hair can be caught in moving
parts.
g.
only use safety equipment that has
been approved by an appropriate
standards agency. Unapproved
safety equipment may not provide
adequate protection. Eye protection
must be ANSI-approved and breathing
protection must be NIOSH-approved for
the specific hazards in the work area.
SKU 67707
for technical questions, please call 1-800-444-3353.
4.
power tool use and care
a.
do not force the power tool. use
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate
for which it was designed.
b.
do not use the power tool if the
power Switch does not turn it on
and off. Any power tool that cannot
be controlled with the power switch is
dangerous and must be repaired.
c.
disconnect the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
5.
hold the power tool by insulated
gripping surfaces when performing an
operation where the cutting tool may
contact hidden wiring. Contact with a
"live" wire will make exposed metal parts
of the tool "live" and shock the operator.
6.
use clamps or another practical way
to secure and support the work piece
to a stable platform. Holding the work
by hand or against your body leaves it
unstable and may lead to loss of control.
a.
Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or
these instructions to operate the
power tool. Power tools are dangerous
in the hands of untrained users.
b.
maintain power tools. check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. if damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Page 3
Hide quick links:
Advertisement
Table of Contents
