Error
Code
E35
Thermistor
---
Under-voltage (brown-
out) with output shutoff
Error Trip Conditions
Use function code D_08 to access the error trip conditions for the
current error as shown in the table below. Use the Up and Down
arrow keys to scroll through the trip condition parameters.
1. Access D_08
2. Press Function Key
3. Press Up/Dn key (if
error exists)
Name
Step
1
2
Probable Cause(s)
• Thermistor input, [THM] and [L], is
over the temp. threshold
• Low input voltage caused the
inverter to turn OFF the motor output
and try to restart. If unsuccessful, a
trip occurs.
Display
08
d
If no error:
_ _ _
If error exists:
Exx
(error code)
Output frequency at
trip point:
10.0
Motor current at trip
point:
0.025
DC bus voltage at trip
point:
189.8
10