Preparation; Installation Of The Tft Tv To The Wall - Hitachi 20LD2400 Instructions For Use Manual

Preparation

Install Display on solid horizontal surface such as a table or desk.
For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault
and unsafe situations, please do not place any objects on top of the set.

Installation Of The TFT TV To The Wall

1- To install the TFT TV on the wall, first of all, foot assembly should be removed. Unscrew
the 2 screws that attach the foot top cover and the 4 screws that attach the foot to the TFT
panel and remove the foot assembly from the TFT panel.
TFT Panel
Foot
Foot Top Cover
2- Place the 4 hangers to the circular screw holes at the rear of the TFT and screw them to
the TFT panel with 4 (M4 x 10) screws.
3- Decide the place on the wall where the TFT panel would be placed. Level and mark with a
pencil the 4 mounting points on the wall hanger. Drill pilot holes for the plastic anchors and
then fix the wall hanger with 4 screws (4 x 30).
4- Raise the TFT panel and hang it to the holes on the wall bracket from the 4 hanging
screws at the rear of the TFT panel.
- 4 -