Important Note - Hitachi 20LD2400 Instructions For Use Manual

important note before starting Auto Setup
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV
please ensure that they are switched on before automatic tuning begins. In the case of
a VCR, insert a pre-recorded tape and begin playback of your equipment. These
measures ensure that all your external equipment is tuned in during the Auto Setup
procedure.
start Auto Setup procedure
1
First select the country by using the "
control.
2
Use the " " or " " to select Language. Select the required language by
using the " " or " " buttons on the remote control
3
To start A.P.S., select A.P.S. by using " " / " " buttons and press the " "
button. Press "OK" button on the remote control to start A.P.S.You will
see the message " A.P.S. is running Please Wait". The set will tune in
all available channels.
4
When A.P.S is complete press "M" on the remote control to remove the
menu and start viewing the TV.

important note.

Once the TV has found all your local stations, they are then automatically assigned a
programme number.
If you would like to change the programmes please refer to the Installation Menu section of the
instruction book.
" or " " buttons on the remote
A.P.S.
country UK
A.P.S.
language English
down for A.P.S.
INITIAL A.P.S. WARNING
Please Check
the Antenna Cable
<M> to cancel <OK> to start
A.P.S. is running
Please Wait
<M> to exit
EU