Power Swivel - Hitachi P50XR01E User Manual

FEATURES (continued)

Power Swivel

With the Desktop stand, you can adjust the angle of the panel side to side by pressing
control.
Power Swivel is not available for 60" model.
1. Press button on the remote control.
The Swivel Display (as shown in the fi gure on the right) will appear on the screen.
2. Adjust the angle of the panel with
The unit will be able to rotate ±30 degrees to each side.
CAUTION
When you use the Power Swivel function, make sure that the Power Cord, cord
or chain connected to the wall is loose enough to operate the Swivel function
securely.
Do not put hands or face near the unit whilst operating the Swivel. It could
cause personal injury. Beware especially when small children are around the
unit.
NOTE
• If the stand cable is not connected to the unit, the message "Not Available" will
appear on the screen.
• The Swivel Display will automatically disappear when no operation has been
made for a few seconds.
CAUTION
• Do not push the panel with your hands whilst operating the Swivel. It could damage the panel and/or stand.
• Do not allow children to play or hang on the TV. These actions may tip it over, causing personal injury.
• Do not swing the unit back and forth.
• Do not place any fragile objects around the unit. The unit would hit the object(s) during the Swivel operation and
could cause the breakage of the objects and/or the stand.
• To operate the Swivel function correctly, place the unit on the stable surface.
• When you use the unit as wall-mounting, disconnect the stand cable from the unit before installation.
Information
About Swivel terminal connection (*This is available only for 50" model.)
• To connect the Desktop stand to the unit.
Connect the designated stand cable to the Swivel terminal on the
rear side of the unit.
• To disconnect the stand from the unit.
Before detaching the stand from the unit, make sure to disconnect
the stand cable from the Swivel terminal on the rear side of the unit.
CAUTION
• Turn Off the Main Power of the unit when connecting or disconnecting the stand cable to the unit.
button whilst Swivel Display is on the screen.
◄►
button on the remote
Swivel
button
Swivel
The Swivel Display
Slack
30°
30°
91