Table of Contents
Advertisement
TROUBLESHOOTING
Before calling service technician, check the following tables fi rst. If the problem is not be solved with the suggested
procedures, contact your local dealer. For your safety, NEVER try to repair the product by yourself.
When Following Messages Appear on Screen
Message
Power saving
No sync. signal
Not available
Weak signal or channel not
available. Check aerial.
Encrypted Channel
HDD is full.
HDD is full. Recording ended.
Running out of free space on HDD.
Recorded time exceeded 10 hours.
Recording ended.
Now deleting.
The number of programmes
reached maximum, please delete.
Recording can not be done.
Programme is copyguarded.
HDD is not ready. Please wait.
HDD initialization is now operated.
Please leave the television on.
HDD is not accessible.(1)
HDD is not accessible. Playing
ended.
HDD is not accessible. Recording
ended.
Initialization of HDD failed. Please
try again.
Condition / Action
This indicates it is in Power Save mode.
The indicating lamp pulses Blue or lights Red.
The unit cannot detect any signals from any input terminals.
• Check if the cable is connected correctly and fi rmly.
• Check if the power of any external equipment is ON.
• Check if the input selection matches the connection terminal.
• Check if the PC is in Power Save mode or not.
This shows when the selected operation is not available.
• Check aerial lead if it is disconnected / damaged / misaligned.
• Check with your dealer if it is out of signal area or not. (in DTT mode)
• Check if the common interface module inserted correctly. (in DTT mode)
Please delete unnecessary recorded programmes.
Please delete unnecessary recorded programmes.
Please delete unnecessary recorded programmes.
Recording time must be less than 9h59m.
Recorded programme is being deleted. Please operate after the message
disappears.
Recorded programmes are already 999. Please delete unnecessary recorded
programmes.
Copyguarded programmes cannot be recorded.
HDD is starting up, or HDD Power Save is On. Please operate HDD after the
message disappears.
Please operate HDD after the message disappears.
This message is displayed when HDD is not accessible except playback and
recording. If this message appears repeatedly, please turn the Main Power
switch Off, make sure the Power Indicating Lamp is turned Off, and then turn
Main Power again.
This message is displayed when HDD is not accessible during playback. If
this message appears repeatedly, please turn the Main Power switch Off,
make sure the Power Indicating Lamp is turned Off, and then turn Main Power
switch On again.
This message is displayed when HDD is not accessible during recording. If
this message appears repeatedly, please turn the Main Power switch Off,
make sure the Power Indicating Lamp is turned Off, and then turn Main Power
switch On again.
Please turn the Main Power switch Off, make sure the Power Indicating Lamp
is turned Off, and then turn Main Power switch On again. Please initialize
HDD again after that.
Page
29
40
,
,
93
22
26
~
24
51
,
56
56
37
37
37
95
Hide quick links:
Advertisement
Table of Contents
